Granulating system
Water ring

mainly used for plastic materials such as LDPE、HDPE、PP etc

Description

The water ring pelletizer system consists of a die, water circulation room, pelletizer, flushing channel, centrifugal hydroextractor and a circulating water-cooling system. Plastic raw materials are melted and discharged through the extruder, then discharged through the die. During discharge, plastic materials are cut by high-speed rotating blades and the plastic pellets are shaken off; after which the pellets are cooled and carried off by circulating water film to the water circulation room. Using the flushing channel to transport plastic pellets to the centrifugal extractor can not only prevent adhesion of the plastic pellets but also acts as a cooling process. The plastic pellets are generally round-flat, cylindrical or ball shaped.

The unique features of this system include: The die surface does not make direct contact with water, low costs from die and blade wear, as well as producing pellets of consistent sizes and shapes after passing through the water circulation (die surface) pelletizer.

It is currently mainly used for plastic materials such as LDPE, HDPE, PP etc..

Inquiry

Step1. Select Model
TypeCWR-200 Output150~300 Motor2.25KW
TypeCWR-250 Output300~600 Motor3.75KW
TypeCWR-300 Output600~1000 Motor5.6~7.5KW
Step2. filling in the required items from the form below.
Name: *
Phone: *
Company: *
E-mail: *
Address:
Comments:*
Security Code:*